ANALISIS PENGARUH POWDER FACTOR TERHADAP HASIL FRAGMENTASI PELEDAKAN PADAPT. SEMEN BOSOWA MAROS PROVINSI SULAWESI SELATAN
DOI:
https://doi.org/10.33536/jg.v3i01.1336Keywords:
Powder factor, fragment, ANFO, detonation, unloadAbstract
Powder factor is comparison of usage amount ANFO with acquirement amount unload limestone with standard Pf between 0.20-0.30.the purpose of this study was to determine the effect on the results of fragmentation factor powder.the method of calculation methods RL,Ash.as for the data requieed the use of ANFO amount bullet holes the size of the fragmen number dismintling explosive results.the results foud that the powder factor is applied already meet the standard 0.20-0.30 kg/ton.then the result of the fragmentation value of 80 cm.from this study it can be concluded that the powder factor and blast fragmentation results already meet the standard the has been set.
Downloads
References
AECI., 1978. Blasthole drilling and initiation patterns in surface blasting. Australian
Ash.R.L., 1990. Design of blasting Round, surface mining, New York
Balkema, A.A., 1999. Blasting principiles for open pit mining, Coloradoschool of mines, golden, Colorado, USA
Bhandari, S.1975. improved fragmentation by reduced burden and more spacig on blasting. New York
Dwihandoyo,. G, M., Simangunsong., 2008., Dampak Negatif Peledakan Terhadap Lingkungan/Masyarakat, ITB: Bandung
Graha, D.S., 1987, Batuan dan Mineral, Bandung.
Hangan., 1983. The influence of controllable blast parameters on fragmentation and mining costs. Australian
Konya.,1988. Problems with malfunctioning blastholes. New Orleans
Kuznetson., 1973. The mean diameter of the fragments formed by blasting rock New York
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Jurnal Geomine
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
3.png)
1.png)
.png)
.png)
.png)
.png)
