Analisis Mineralogi dan Kimia Bentonit Daerah Bone Bolango, Provinsi Gorontalo

Authors

  • Sufriadin Sufriadin
  • Purwanto Departemen Teknik Pertambangan, Fakultas Teknik, Universitas Hasanuddin, Makassar
  • Nanda Pratiwi Rapele Departemen Teknik Pertambangan, Fakultas Teknik, Universitas Hasanuddin, Makassar
  • Chairil Sastria Departemen Teknik Pertambangan, Fakultas Teknik, Universitas Hasanuddin, Makassar
  • Shany Sofiah Fauth Departemen Teknik Pertambangan, Fakultas Teknik, Universitas Hasanuddin, Makassar
  • Astina Aras Departemen Teknik Pertambangan, Fakultas Teknik, Universitas Hasanuddin, Makassar

DOI:

https://doi.org/10.33536/jg.v8i02.1396

Keywords:

bentonite, smectite, plagioclase, weathering, Gorontalo

Abstract

Bentonite is one of industrial mineral deposit that has many applications in industries. In order to optimize its utilization, it is needed an initial assessment about the quality in particularly mineralogical and chemical composition. The objective of this study was to analyze mineralogical and chemical properties of bentonite samples from Bone Bolango Area, Gorontalo Province. Mineralogical analysis was performed by means of microscopic and X-ray diffraction (XRD) methods while chemical composition was determined by X-ray fluorescence (XRF) spectrometry. Results of analysis show that bentonite samples were composed of smectite mineral of montmorillonite type with the impurities constitute of plagioclase, quartz, calcite and maghemite. Chemical composition of Bone Bolango bentonite is dominated by SiO2 and Al2O3 with the ratio in the range between 1.38 and 1.68. This bentonite was formed by weathering process of volcanic rocks mainly derive from plagioclase alteration. Based on mineral and chemical compositions, Bone Bolango bentonite is categorized as Ca-bentonite with relatively non-swelling property. However it is potentially used as raw materials in ceramic making and as absorbent.

Downloads

Download data is not yet available.

References

Arifin, M. dan Sudradjat, A., 1997, Bentonit (dalam Bahan Galian Indutstri, Editor: Suhala, S. dan Arifin, M.), Puslitbang Tekmira, Bandung.

Arslan, M., Abdioglu, E. and Kadir, S., 2010, Minerlaogy, Geochemistry, and origin of Bentonite in Upper Cretaceous Pyroclastic Units of The Tirebolu Area,Giresun, Northeast Turkey, Clays and Clay Minerals, Vol.58, pp. 120 – 141.

Brigatti, M.F., Galan, E., and Theng, B.K.G., 2006, Structures and Mineralogy of Clay Minerals (In Handbook of Clay Science: Bergaya, F., Theng B.K.G. and Lagaly, G, Editors), Elsevier, pp. 19-86.

Choo, K.Y., and Bai, K., 2016, The effect of the mineralogical composition of various bentonites on CEC values determined by three different analytical methods, Applied Clay Science, Vol. 126, pp. 153-159.

Cristidis, G.E. and Huff, W.D., 2009, Geological Aspects and Genesis of Bentonites, Elements, Vol.5, pp. 93-98.

Eberl, D., 2003., User’s Guide to RockJock – A Program For Determining Quantitative Mineralogy from Powder X Ray Diffraction Data., US Geological Survey, Open File Report 03 – 78, 55 p

Grim, R.E., and Guven, N., 1978, Bentonites: Geology, Mineralogy, Properties and Uses, Elsevier, Amsterdam, 256 p.

Harvey, C.C and Lagaly, G., 2006., Conventional application (In Handbook of Clay Science: Bergaya, F., Theng B.K.G. and Lagaly, G, Editors), Elsevier, pp. 501-541.

Huff, W.D., 2016, K-Bentonites: A Review, American Mineralogist, Vol. 101, pp. 43-70.

Kaufhold, S., Dohrmann, R., Ufer, K., Meyer, F.M., 2002, Comparison of Methods for the Quantification of Montmorillonite in Bentonites, Applied Clay Science, Vol.22, pp. 145 – 151.

Odom, I.E., 1984, Smectites Clay Minerals: Properties and Uses, Phil Trans. R. Soc. Lond. A311, pp. 171-189.

Moore, D.M, and Reynolds, R.C., 1997, X-ray diffraction and the Identification and Analysis of Clay Minerals, Oxford University Press, New York, 376 p.

Murray, H.H., 2007, Applied Clay Mineralogy: Occurrences, Processing and Applicaion of Kaolins, Bentonites, Palygorskite-Sepiolite, and Common Clays, Elsevier, Amsterdam.

Panjaitan, R.R., 2010., Kajian penggunaan bentonit dalam industri, Vol. XLV, No.3, pp. 22-28. (lib.kemenperin.go.id › neo › download_artikel)

Pusat Sumberdaya Geologi., 2019, Executive Summary Pemutakhiran Data dan Neraca Sumberdaya Mineral dan Batubara Status 2018 (http://psdg.geologi.esdm.go.id/images/stories/neraca/2018/ExSumNeracaMinerba2018.pdf, diakses tanggal 11 November 2018.

Reddy, K.R., Ravindranadh, K., Reddy, C.V., Babu, B., Naveen, S., and Raghu, A.V., 2019, Recent advances in layered clays intercalated polymer nanohybrids: Synthesis strategies, properties, and their applications (In Modified Clay and Zeolite Nanocomposite Materials), pp.197-217.

Srodon, J., Drits, V.A., McCarty, D.K., Hsieh, J.C.C. and Eberl, D.D.,2001, Quantitative XRD analysis of clay-rich rocks from random preparations. Clays and Clay Minerals, Vol. 49, pp. 514-528.

Srodon, J., 2002., Quantitative mineralogy of sedimentary rocks with emphasis on clays and with applications to K-Ar dating., Mineralogical Magazine, Vol.66 No.5, pp. 677-687.

Downloads

Published

31-08-2020

How to Cite

Analisis Mineralogi dan Kimia Bentonit Daerah Bone Bolango, Provinsi Gorontalo. (2020). Jurnal Geomine, 8(02), 104-113. https://doi.org/10.33536/jg.v8i02.1396

Similar Articles

1-10 of 22

You may also start an advanced similarity search for this article.