ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA (K3) MENGGUNAKAN METODE HEALTH FAILURE MODES AND EFFECT ANALYSIS (HFMEA) PADA PROSES PRODUKSI REFINED CARRAGENAN PT. BIOTA LAUT GANGGANG KAB. PINRANG

Yusril Amin; Rahmaniah Malik; Muhammad Nusran

doi:10.33096/japsi.v1i2.432

Authors

Yusril Amin Universitas Muslim Indonesia
Rahmaniah Malik Universitas Muslim Indonesia
Muhammad Nusran Universitas Muslim Indonesia

DOI:

https://doi.org/10.33096/japsi.v1i2.432

Abstract

Tujuan: Secara umum penelitian ini bertujuan untuk mengurangi risiko terjadinya kecelakaan kerja yang masih terjadi pada proses produksi di departemen refined carrageenan PT. Biota Laut Ganggang

Desain/Metodologi/Pendekatan: menganalisa proses produksi, mengidentifikasi risiko yang dapat mengakibatkan terjadinya kecelakaan kerja serta mengetahui penyebab terjadinya risiko tersebut. Kemudian membuat solusi perbaikan pada risiko yang ditemukan dengan menggunakan metode Health Failure Modes and Effect Analysis (HFMEA).

Temuan/Hasil: Dari 48 kegiatan sub proses terdapat 40 kegiatan yang memiliki potensi bahaya kecelakaan kerja dan ada 8 kegiatan yang tidak memiliki bahaya kecelakaan kerja.

Dampak: Penelitian ini berdampak pada proses identifikasi risiko pada proses produksi perusahaan.

Kesimpulan: Berdasarkan hasil identifikasi risiko kecelakaan kerja pada proses produksi departemen refine carragenan PT. Biota Laut Ganggang dengan menggunakan metode Health Failure Modes and Effect Analysis (HFMEA) didaptkan 40 kegiatan pada sub proses yang berpotensi terjadi bahaya dengan mengidentifikasi penyebab bahaya tersebut dan efek luka yang di timbulkan pada beberapa anggota tubuh.

References

Adamopoulos, I. P., & Syrou, N. F. (2022). Workplace Safety and Occupational Health Job Risks Hazards in Public Health Sector in Greece. European Journal of Environment and Public Health, 6(2), em0118. https://doi.org/10.21601/ejeph/12229

Afolabi, F. J., de Beer, P., & Haafkens, J. A. (2021). Can occupational safety and health problems be prevented or not? Exploring the perception of informal automobile artisans in Nigeria. Safety Science, 135. https://doi.org/10.1016/j.ssci.2020.105097

Bautista-Bernal, I., Quintana-García, C., & Marchante-Lara, M. (2021). Research trends in occupational health and social responsibility: A bibliometric analysis. Safety Science, 137(105167), 1–9. https://doi.org/10.1016/j.ssci.2021.105167

Fole, A. (2023). Perancangan Strategi Mitigasi Risiko Pada Proses Bisnis CV. JAT Mengunakan Metode House of Risk. Journal of Industrial Engineering Innovation, 1(02), 54-64. https://doi.org/10.58227/jiei.v1i02.109

Fole, A., & Mujaddid. (2023). Identifikasi Jalur Evakuasi Institut Teknologi Dan Bisnis Nobel Indonesia. Journal of Industrial Engineering Innovation, 1(1), 10-17. https://doi.org/10.58227/jiei.v1i1.56

Jensen, I., Arapovic-Johansson, Z., & Aboagye, E. (2022). The Cost-Effectiveness Analysis of the Productivity Measurement and Enhancement System Intervention to Reduce Employee Work-Related Stress and Enhance Work Performance. International Journal of Environmental Research and Public Health, 19(4), 1–19. https://doi.org/10.3390/ijerph19042431

Kusrini, E., Safitri, K. N., & Fole, A. (2022). Mitigasi Risiko di Distribusi Sustainable Supply Chain Management Menggunakan Metode House Of Risk (HOR). Integrasi: Jurnal Ilmiah Teknik Industri, 7(1), 14-23. https://doi.org/10.32502/js.v7i1.4348

Mahfirah’eni, R., & Suhardi, B. (2021). Correlation Overview between Knowledge and Attitudes towards Occupational Safety and Health (K3) with Occupational Accidents. In Asian Journal of Social Science and Management Technology (Vol. 3, Issue 4). https://www.ajssmt.com/Papers/341116.pdf

Mail, A., Chairany, N., & Fole, A. (2019). Evaluation of Supply Chain Performance through Integration of Hierarchical Based Measurement System and Traffic Light System: A Case Study Approach to Iron Sheet Factory. In Int. J Sup. Chain. Mgt (Vol. 8, Issue 5). https://doi.org/10.59160/ijscm.v8i5.2584

Nur, M. (2020). Analisis Sistem Kesehatan Dan Keselamatan Kerja Dengan Metode Ecfa Di. PT XYZ. Industrial Engineering Journal, 9(2), 1–7. https://doi.org/10.53912/iejm.v9i2.565

Padhil, A., Chairany, N., Ahmad, A., Ramli, H., & Malik, R. (2021). Supply Chain Risk Analysis In Kub – Ik Mataram Macoa With House Of Risk (HOR). Journal of Industrial Engineering Management, 6(2), 51–60. https://doi.org/10.33536/jiem.v6i2.942

Padhil, A., Fachry Hafid, M., & Dwi Wahyuni, A. P. (2022). Risk Analysis of Water Distribution in PDAM City of Makassar Using the House of Risk (HOR) Method. American Journal of Mechanical and Industrial Engineering, 7(4), 63–69. https://doi.org/10.11648/j.ajmie.20220704.12

Salguero-Caparrós, F., Pardo-Ferreira, M. C., Martínez-Rojas, M., & Rubio-Romero, J. C. (2020). Management of legal compliance in occupational health and safety. A literature review. In Safety Science (Vol. 121, pp. 111–118). Elsevier B.V. https://doi.org/10.1016/j.ssci.2019.08.033

Solmaz, M. (2023). Evaluation of Root Cause Analysis from Occupational Health and Safety Data in a Hospital: A Retrospective Study. Int. J. Occup. Safety Health, 13(1), 41–46. https://doi.org/10.3126/ijosh.v